my apricorn sata wire 3.0 is not working

If it’s plugged into a USB 3.0 port, try a USB 2.0 port. It’s possible the port in question is failing, or just being finicky with your specific drive. If the drive still isn’t working, unplug it and try a different USB port. Save your changes and restart your computer to enter BIOS.Then you’ll see SATA Controller Mode Option.Restart your computer, and press the F2 key after the first screen.Solution 2: Configure the SSD settings in BIOS Random long freezes – sometimes followed by an automatic shut down and restart.Occasional blue screen of death (BSOD) crashes.Incorrect BIOS settings may cause the new hard drive to be disabled. Connection issues can be from a faulty USB port, or a damaged cable. If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. In the IDE Configuration menu, select Configure SATA as and press Enter.In the BIOS Utility dialog, select Advanced -> IDE Configuration.Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.To Set the System BIOS and Configure Your Disks for Intel SATA or RAID The easiest way to test a cable is to replace it with another cable.

Be sure to check your SATA cables are tightly connected to the SATA port connection. The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect.

What should I do if my SATA cable is not working?.

How can I tell if my hard drive is SATA 0?.

Do you get the correct answers on SATA questions?.

How do I know if my hard drive is undetected?.

My apricorn sata wire 3.0 is not working